PRODUCT CENTER

A588 Pressure Vessel Carbon Steel Coil

ASTM A588 steel is a high-strength low-alloy structural steel section, coil and bar used for welded, riveted or bolted structures. These steels are mainly used in welded bridges and buildings where weight reduction or increased durability is required. In most environments, the atmospheric corrosion resistance of this steel is significantly better than that of carbon structural steel with or without the addition of copper.

GB/T11251 1345 Alloy Structural Steel Coil

GB/T 11251 alloy steel is one of the common hot-rolled alloy structural steel coils. GB/T 11251 Hot-rolled coil has high strength and wear resistance, high hardenability, moderate cold deformation plasticity, good cutting performance and good welding performance. During the heat treatment, the toughness of the steel decreases less. GB/T 11251 alloy steel can still maintain high toughness under water cooling conditions, but it has a tendency of overheating sensitivity, white spot sensitivity and temper brittleness.

EN 10083-3 4135/4140/4142/6150 Alloy Structural Steel Coil

EN 10083-3:2006 steel is an alloy steel used for quenching and tempering. This standard regulates the technical delivery conditions of alloy steels. Under the steel 50CrMo4, 51CrV4, 20MnB5, 34CrMo4, 42CrMo4, 27MnCrB5-2. EN 10083-3 steel plate has high strength, high toughness and good hardenability. The alloy requires high temperature preheating before welding to eliminate the stress after welding.

API Spec 5L Pipeline Steel Coil

API Spec 5L is an international standard that specifies the manufacturing requirements for two product specification grades (PSL 1 and PSL 2) of seamless and welded steel pipes used in pipeline transportation systems in the oil and gas industry.

A179 Seamless Steel Tube

A179 seamless cold drawn low carbon steel pipe is equivalent to China's No. 10 high-quality low-carbon steel. A179 is suitable for cold-drawn high-quality low-carbon seamless steel pipes for heat exchangers and condensers.

A514 Carbon Steel Coil

ASTM A514 steel is available in several grades: A, B, C, E, F, H, J, K, M, P, Q, S, and T, all of which have the same mechanical properties. ASTM A514 steel plates are conventionally quenched and tempered steel. ASTM A514 steel coil is known for its high yield strength, weldability and toughness, even at low temperatures. ASTM A514 steel is a special high-strength steel, mainly used as building structural steel.

A573/A573M Carbon Steel Coil

ASTM A573/A573M grades are divided into 58, 65 and 70. Steel coils are suitable for structural carbon-manganese-silicon steel plates with three tensile strength ranges. ASTM A573/A573M steel coils are mainly used for important purposes of improving notch toughness at room temperature.

A588 Carbon Steel Coil

ASTM A588 steel includes Class A, Class B, Class C, and Class K. The ASTM A588 steel specification is based on the standard specification for high-strength low-alloy structural steel with a lower yield point of up to 50ksi for applications requiring high strength and corrosion resistance.

JIS G3101 SS400/SS490/SS540 Carbon Steel Plate

JIS G3101 SS400 is a common carbon structural steel grade. Other grades of JIS G3101 are ss330, ss490 and ss540. Related product types include steel plate, steel plate, steel section, steel pipe, etc.

A202 Pressure Vessel Steel Plate

ASTM A202 grade is divided into: A, B, boiler vessel plate is mainly used for welding boilers and other pressure vessels. There are two grades of ASTM A202 boiler vessel steel: Grade A and Grade B. The thickness of ASTM A202 boiler vessel plates is limited to 2in, I .e. 50mm.

A203 Pressure Vessel Steel Plate

ASTM A203 grades are: A, B, D, E, F. Boiler vessel plates are nickel alloy steel materials used in the manufacture of high temperature pressure vessels. The performance of ASTM A203 boiler vessel plates is based on their Ni composition. ASTM A203 Boiler Container Plates are available in five grades: Grade A, Grade B, Grade D, Grade E, and Grade F.

A204 Pressure Vessel Steel Plate

ASTM A204 boiler vessel plate is molybdenum alloy steel plate, mainly suitable for welding boilers and high temperature pressure vessels. According to the molybdenum content, ASTM A204 boiler container plate is divided into 3 grades: A, B, C. The thickness of ASTM A204 boiler vessel plates is limited only by the ability of the chemical composition to meet the specified mechanical property requirements.